| Delivery time: | 2-4 Days |
Super fine continuous water mister makes colour blending and getting a super smooth finish with Fusion Mineral Paint a breeze!
The trick to colour blending is to not add too much water; a little goes a very long way. Our paints use mineral pigments, and adding too much water can give you pigmentation streaks.
This water mister can be used to dampen your brushes and rollers while painting to increase paint flow as it is a little bit easier with an ever so slightly dampened brush or roller.
The Fusion water mister can also be used as a vessel for your TSP Alternative and water. Be prep ready for your next project with the Fusion water mister.
Note: Be sure to label your water mister with the contents inside. Always test your methods prior to tackling your project!
Solutions:
1. It is advised to REMOVE the tube first, refill the entire bottle with water, mount and screw the top nozzle back WITHOUT the tube, press the trigger down slightly and rebound, repeating this action several times. After ensuring the sprayer can spray water, install the tube back onto the bottle.
2. Only fill mister with water, otherwise the nozzle might become clogged over time. It is advised to fill with DISTILLED WATER or SOFT WATER. Hard water is not advised as the minerals in hard water will build up and prevent the mister from functioning correctly. If you don't have a water softener, use distilled water.
3. Be sure to change the water frequently. Leaving the water in the bottle for a long period of time may lead to unwanted smells to develop inside the bottle.
4. If the mister becomes clogged, it is advised to fill the bottle with DILUTED VINEGAR, SOAPY WATER or DETERGENT, and then after a few hours spray the solution out to see if the clog inside the nozzle is dissolved.
